With Sillites®, you totally eliminate the need for extension cords, thereby removing the ugliness and hazards associated with them. Moreover, Sillites® present a rigid and secure installation by virtue of being mounted with a standard three-pronged grounded plug. Sillites® candles can also be wired together so that they can be controlled from a single switch, timer or photo-cell.

Sillites® candles include a 7-1/2 watt bulb that is safe to touch. The bulbs are available at any Lowe's, True Value Hardware or any lighting store; so they are easy to replace the day of your big party, (unlike low voltage candles that use a hard to find proprietary bulb). The 3 watt flicker bulbs can also be used in our candles. We offer the standard 7" tall candle and also a 9" tall candle to look appropriate in larger windows.

There are no transformers to fail in the Sillites® candle, whereas the low voltage system has two &mdash a remote mounted primary transformer, which steps the power from 120v to 24v, and a second transformer in each candle shaft to step the 24v down to 12v &mdash thus there are many points of potential failure.

Since Sillites® candles operate on standard 120v power: the Sillites® self-contained receptacle (SCR) is wired with standard Romex wire and can easily be added to an existing home by simply drilling a hole in the existing window sill and running the wire through the wall to the nearest outlet; (this is especially easy if your house is already wired with a “holiday circuit” of switched outlets beneath each window). Please see the RR9, remodel receptacle, designed for easy retro-fitting into existing 2" or wider windowsills.

The self-contained receptacle (SCR & SCRMB) mounts flush and can be used to operate any 120v lamp or appliance; not just the Sillites® candle.

Yes! The RR9 Remodel Receptacle is specifically designed for installation into existing windowsills 2” or wider. If your windowsill is 4-1/2” or wider, the original SCR can be retro-fitted in the same manner: A hole is drilled in the windowsill and the wire is “fished” through the wall to the nearest existing receptacle. Please see the complete instructions on the Installation-Remodeling page.

Certainly! The Sillites® SCR is a standard 15 amp electrical receptacle (except that it does not need to be mounted into a junction box) and you can plug any 120 volt item you like into it. Since it is a lot easier to drill a round hole in wood, rather than cut out for a square junction box, the SCR is the perfect choice for fireplace mantels, the sides of kitchen islands, built-in cabinets, hardwood floors, etc. Please see the Self-Contained Receptacle page for illustrated installation methods.

Yes! The Sillites® candles include a 7 watt bulb that is safe to touch whether on or off.

Yes! All Sillites® products are UL Listed in the United States and Canada.

Sillites® are available in two heights: 7" and 9", and four finishes: Antique Bronze (AB), Brushed Satin Nickel (BN), Matte Black (MB), and Polished Brass (PB). Beeswax sleeves (yes they are real beeswax with a hardener added to prevent melting) in an ivory or a golden (light beige) finishes are available as an accessory to replace the standard gloss white sleeve provided with each candle. See the various choices here: Sillites® Options

The Sillites® self-contained receptacle is available in black (#SCRMB) and white (#SCR), and includes a child-proof cover cap which can be painted to match in the field.

Of course! Simply contact us at (770) 755-5654 or Email Us.

Yes, per the National Electric Code, outlets can be installed “face up” indoors in dry & damp locations, except on a kitchen or bathroom work surface (they can be mounted vertically in the riser or on the side of the cabinet). The Sillites® SCR can also be wired to a GFI outlet or breaker, just like a standard receptacle, to become a GFI protected outlet.

Just like wiring for standard electrical outlets: have your electrician run standard Romex wire to each location where the SCR is to be installed. The SCR will accept one or two sections of 14/2 or 12/2 Romex. Please visit the Original SCR page to download the instruction sheets.

The most common method in new construction is to wire the receptacles to one or two switches or timers to control them all from a single location. If remodeling, the PCW photo cell can be screwed into the Sillites® candle, under the bulb, to automatically turn a single candle on from dusk to dawn and off during the day. Note that the PCW will also work with any incandescent candelabra socket in your coach or post top light fixtures.

Certainly. If your house has standard square box receptacles already installed in the window sills or mantel, then you only need to purchase the Sillites® candles and plug them in!

The 7-1/2 watt bulb included in Sillites® candles can be found at True Value Hardware (item #682898), Lowe's (item #154136) and at any lighting showroom (ask for 7 watt type C flame tip bulbs). Also, the 3 watt flicker flame, CA-5 bulbs can be used.